ZTC Thunder Board M.2 (NGFF) SSD to SATA III Adapter Board
| IN STOCK |
Transcend StoreJet 25S3 SATA 6Gb/s 2.5-inch Hard Drive Enclosure USB3.0
| IN STOCK |
OWC Mercury Elite Pro Dual External RAID Enclosure for 2 x 3.5" SATA Drives, USB 3.2 & eSATA
| IN STOCK |
StarTech.com x4 PCI Express to M.2 PCIe SSD Adapter
| IN STOCK |
ZTC Lightning Card M.2 NGFF SSD (PCIe 2 and 4 Lane or SATA III Type) To PCI-e or SATA III Internal Card Model ZTC-EX001
| IN STOCK |
Transcend CM10G M.2 PCIe / SATA SSD Enclosure Kit (M.2 2230/2242/2260/2280) Black
| IN STOCK |
AData XPG EX500 Tool-Free External USB3.1 Enclosure for 2.5-inch SATA SSD/HDD
| IN STOCK |
ZTC Sky 2.5-inch Enclosure mSATA SSD (Half or Full Size) to SATA III Board Adapter - 520MB/s 6GB/s
| IN STOCK |
ZTC M.2 NVMe SSD External Portable Enclosure with RGB Lighting USB-C 3.2 Gen 2
| IN STOCK |
OWC ThunderBay 4 - Four-Bay Thunderbolt 3 External Storage Enclosure for 2.5" and 3.5" SATA Drives
| IN STOCK |
OWC ThunderBay 8-Bay Thunderbolt (40Gb/s) External Storage Enclosure with SoftRAID for 2.5" and 3.5" SATA Drives
| IN STOCK |
OWC miniStack STX Stackable Storage Enclosure with Thunderbolt Hub Xpansion - Matte Silver
| IN STOCK |
ZTC Thunder Enclosure NGFF M.2 SSD to USB 3.0 - Aluminum Shell, 5 Size Board - High Speed 6GB/s
| IN STOCK |
AData EC600 2.5-inch HDD / SSD Enclosure USB3.2 Black
| IN STOCK |
OWC ThunderBay 8 Thunderbolt (40Gb/s) External Storage Enclosure for 2.5-inch and 3.5-in SATA Drives
| IN STOCK |
Space Optimization
Housed within a 19" industry-standard rack, SuperBlade® servers reduce server footprint in the data center. Power, cooling and networking devices are aggregated in the rear of the chassis which optimizes the required amount of space.
Up to 20 two-socket blade servers blades can be installed in an 8U enclosure. Compared to the 20U of rack space that twenty 1U servers would normally require as individual servers, the SuperBlade provides more than 60% space savings with 100 nodes and 20 switches in a 42U rack.
Cable Reduction
The SuperBlade® server chassis enclosure greatly simplifies the cabling process by aggregating cabling of twenty servers at once. Up to 95% of network, power, and KVM cabling required for twenty 1U servers is reduced by moving to blade servers in a single chassis. These cabling reductions continue across networking, SAN connectivity, and management controllers.
Reducing the number of cables speeds up the deployment of servers and helps reduce troubleshooting issues by presenting fewer physical connections to the servers.
| COLOR | Black, Grey |
| PACKAGING | Retail packaging |